Electrical Sheets

• Application
• Cable insulation, switchboards, electrical panels, transformer insulation

• Breakdown Voltage
• 20 kV/mm

• Coating Type
• Uncoated

• Color
• Black

• Density
• 1.4 Gram per cubic centimeter(g/cm3)

• Feature
• High dielectric strength, flame retardant, anti-corrosive, moisture resistant

• Heat Conductivity
• 0.16 W/mK

• Installation Guideline
• Ensure dry and clean surface, cut to size, install using adhesive or mechanical fixing

• Layer
• Single Layer

• Material
• PVC (Polyvinyl Chloride)

• Max Withstanding Temperature
• 70C

• Product Type
• Electrical Insulation Sheet

• Rated Voltage
• 600V

• Size
• 5 meters x 1 meter x 2.5mm

• Surface Treatment
• Smooth

• Tensile Strength
• 16 MPa

• Thermal Conductivity
• 0.16 W/mK

• Thickness
• 2.5mm

• Width
• Approx. 1 meter

• Application
• Electrical Insulation, Panel Board, Switchgear, Transformer Isolation

• Breakdown Voltage
• approximately 18kV/mm

• Coating Type
• None or Optional Anti-Arc Coating

• Color
• Yellow, Black, Green

• Density
• 1.2 Gram per cubic centimeter(g/cm3)

• Feature
• High Dielectric Strength, Flame Retardant, Chemical Resistant

• Heat Conductivity
• 0.2 W/mK

• Installation Guideline
• Cut to desired size and fit onto insulated surface; ensure dry and clean conditions.

• Layer
• Single or Multi-layer

• Material
• Electrical Grade Insulating Material

• Max Withstanding Temperature
• 120C

• Product Type
• Electrical Sheet

• Rated Voltage
• up to 5kV

• Size
• 5m x Custom Width

• Surface Treatment
• Smooth or Textured Finish

• Tensile Strength
• 160 MPa

• Thermal Conductivity
• 0.2 W/mK

• Thickness
• 3.5mm

• Width
• 5m

• Application
• Electrical insulation

• Coating Type
• None (as per image and use-case)

• Color
• Red / Black / Blue

• Feature
• Flexible, non-conductive

• Installation Guideline
• Lay flat in application areas

• Layer
• Single layer

• Material
• Rubber (assumed from image and application)

• Product Type
• Electrical Sheet

• Size
• 5 m x specified width

• Surface Treatment
• Smooth finish (inferred from image)

• Thickness
• 2 mm

• Width
• 3 ft (900 mm) / 1 m / 1.2 m

• Application
• Electrical insulation, switchgear panels, transformer and generator protection

• Breakdown Voltage
• >30 kV/mm

• Coating Type
• Uncoated

• Color
• Blue and Black

• Density
• 1.45 Gram per cubic centimeter(g/cm3)

• Feature
• High dielectric strength, flexible, moisture and flame resistant

• Heat Conductivity
• Low, suitable for electrical applications

• Installation Guideline
• Cut to required size and lay over surface ensuring no air gaps, fix mechanically or with adhesive as per requirement

• Layer
• Single layer

• Material
• High-grade PVC Compound

• Max Withstanding Temperature
• 105C

• Product Type
• Electrical Insulation Sheet

• Rated Voltage
• Up to 650V

• Size
• 10m x 2.5mm

• Surface Treatment
• Smooth finish

• Tensile Strength
• >12 MPa

• Thermal Conductivity
• <0.20 W/mK

• Thickness
• 2.5 mm

• Width
• 2.5 mm

• Application
• Electrical insulation, thermal insulation, building protection

• Breakdown Voltage
• 10kV/mm

• Coating Type
• Metal foil

• Color
• Silver

• Density
• 0.30 Gram per cubic centimeter(g/cm3)

• Feature
• High insulation, reflective, waterproof, lightweight

• Heat Conductivity
• Low thermal conductivity

• Installation Guideline
• Can be cut and installed with adhesives, tapes, or staples

• Layer
• 2-layer (foil + bubble)

• Material
• Aluminum foil + Polyethylene bubble

• Max Withstanding Temperature
• -40C to +80C

• Product Type
• Electrical Insulation Sheet

• Rated Voltage
• Up to 10kV

• Size
• 10m x 1m

• Surface Treatment
• Metallic coating, embossed

• Tensile Strength
• 100-150 N/5cm

• Thermal Conductivity
• Approx. 0.035 W/mK

• Thickness
• 2mm

• Width
• 1m

• Application
• Electrical panel and switchboard insulation, transformer rooms, substation flooring, workbench surface protection

• Breakdown Voltage
• > 25 kV/mm (Typical)

• Coating Type
• Uncoated - natural surface (Optional fire retardant/chemical resistant coatings per request)

• Color
• Black

• Density
• 1.5 Gram per cubic centimeter(g/cm3)

• Feature
• High dielectric strength, moisture resistant, fire retardant properties

• Heat Conductivity
• Low (for maximum insulation)

• Installation Guideline
• Lay flat on required surface, ensure surface is clean and dry before installation, secure edges as needed

• Layer
• Single Layer

• Material
• High grade Electrical Insulation Rubber

• Max Withstanding Temperature
• Up to 100C

• Product Type
• Electrical Insulation Sheet

• Rated Voltage
• Up to 33kV (Depending on application and certification)

• Size
• 10m x 1m x 3mm

• Surface Treatment
• Smooth finish (Can be anti-skid on one or both sides upon request)

• Tensile Strength
• 4 to 5 MPa (Typical)

• Thermal Conductivity
• < 0.2 W/mK

• Thickness
• 3 mm

• Width
• 1000 mm (Standard can vary)

• Application
• Electrical safety in panels and switchboards

• Breakdown Voltage
• 30 - 40 kV (typical)

• Coating Type
• Uncoated / Plain

• Color
• Red / Black / Blue

• Density
• 1.7 Gram per cubic centimeter(g/cm3)

• Feature
• Non-conductive, Water resistant

• Heat Conductivity
• Low

• Installation Guideline
• Lay flat on floor, trim edges to fit, do not overlap

• Layer
• Single layer

• Material
• Insulating rubber

• Max Withstanding Temperature
• -25C to +80C (typical)

• Product Type
• Electrical Insulation Sheet

• Rated Voltage
• 11kV / 22kV / 33kV (typical for electrical sheets)

• Size
• 10 m length

• Surface Treatment
• Textured / Ribbed finish

• Tensile Strength
• 50 - 100 kg/cm2 (typical)

• Thermal Conductivity
• Very Low

• Thickness
• 3.5 mm

• Width
• 3 ft (900 mm) / 1 m / 1.2 m

• Application
• Electrical insulation, panel lining

• Color
• Red / Black / Blue

• Feature
• Flexible, rollable

• Installation Guideline
• Cut to size, lay flat

• Layer
• Single layer

• Product Type
• Electrical Sheet

• Size
• 20 m length

• Surface Treatment
• Textured surface

• Thickness
• 2 mm

• Width
• 3 ft (900 mm) / 1 m / 1.2 m

• Application
• Electrical insulation, substation & control rooms

• Color
• Black

• Feature
• High voltage resistant, safety compliant

• Installation Guideline
• Place on floor near panels

• Material
• Rubber

• Max Withstanding Temperature
• 60C

• Product Type
• High Voltage Electrical Mat

• Rated Voltage
• 3.3 kV AC RMS

• Thickness
• 2.00 mm

• Application
• Electrical insulation

• Color
• White

• Feature
• Insulating, durable

• Installation Guideline
• Cut to size as needed

• Layer
• Single layer

• Product Type
• Electrical Sheet

• Size
• 3 mtr

• Surface Treatment
• Glossy textured